Element 2m Pure Glider Windy Version - REF


New product

Reinforced pure glider version of Element 2 RC model with 2000 mm / 78.74" wingspan. REF version.

More details

R 5,519.08 tax excl.


R 5,999.00 tax excl.

More info

CLM Pro has released a new model called Element 2, of a wingspan up to 2m. Due to its aerodynamic design and excellent performance, it is very stable and is a joy to fly. The model is constructed using full-carbon parts, so the strength - mass ratio is ideal. It is also very light, giving it amazing characteristics when sailing.

The difference between standard and strong version of RC model Element 2 is in the reinforced main spar and stronger D-box which is made with stronger carbon.
The stronger version is about 30 grams / 1.05 oz heavier than the standard version.

It comes in rudder, elevator, flaps (REF) strong version as a pure glider. For F5J, just cut the nose at the required point.

Since it is so light with excellent performance, Element 2 is designed for flying in the F5J category and other competitions where you need to stand out when there is little or low thermals.

It is the same as with recreational flying: it will guarantee a great flight day and great fun.


The wing is constructed so that the center panel is straight, while the mid and tip panels are angled, which gives the model good stability and easy handling during flight.

The center panel is a single segment, and the mid panel is another which are joined with carbon joiners and have pre-prepared pins so that everything fits together perfectly.

The wings are built with full balsa ribs and everything else out of carbon.

For the carbon D-Box a 3K hybrid material of highest quality is used. The main spar is made of balsa, reinforced with carbon and covered with glass. Ultimately, it is wrapped in kevlar, giving it even greater strength combined with the carbon D-Box. The trailing edge is made of carbon, and there are carbon cap strips on the upper and lower side of the ribs, which gives greater stability and more strength to the whole construction. The flaps are on the whole surface of the centre plan and it has a built-in kevlar hinge. The wings and the tail are covered with high quality Oracover Oralight trasparent foil which weighs only 36g/m2.


The tail is made of balsa with carbon cap strips on both sides, giving it the necessary resistance to stress. The hinges on the vertical stabilizer are made of pre-prepared kevlar so that everything is very smooth. The vertical stabilizer has a pre-prepared slot made of carbon tube so it is easily attached to the pod's carbon tail boom. Therefore, no adjustments are necessary.


The pod is entirely made of fiber glass and carbon, it is very light and strong. It is 2.4 GHz friendly.
The pod is reinforced with carbon on strategic spots which gives it more strength. Edges around the canopy are reinforced with carbon. Canopy is designed in a way that there is enough space to easily manipulate with all components in the pod, allowing the battery to be inserted and connected easily, improving usability on the field. Supplied with a removable carbon canopy. The final color is white - gelcoat, resistant to fraying and resistant to UV rays.

Tail boom:
The carbon tail boom is made from several carbon types. Materials are strategically oriented, so the boom has maximum strength and minimum weight. The carbon tail boom is 700 mm/ (27.55") long and weighs 23g (0.81 oz). The wide end is 19 mm (0.74"), and the narrow end is 12.5 mm (0.49").                               
Carbon V-Mount has ID of 13.7mm (0.54") and weighs 5.5grams (0.194 oz).
You get few different bolts with it.

We used A-tested resin, certified for aeroplane construction for all parts made od composite material. Also, the boom is additionally heated so it get its maximum strength.

Note: You choose the Element 2 wing and tail foil color combination.

These are the colors you can choose from: http://www.clm-pro.com/shopping-cart/covering-material

In order to assemble the set and fly it, little time is necessary because the majority is already assembled.

The only things left to do are gluing carbon tail boom to the pod. Gluing/mounting the vertical stabilizer to the end of the pre-prepared boom. Repeat with V-mount. Place commands, glue to the flaps and position the rudder horn onto the movable rudder surface and join everything together. Finally, place the electronics and you are ready to fly.

Element 2 specifications:


2000 mm



1180 mm


Wing area:

30.32 dm2

 469.96 sq. in.


AG 24, 25, 26

 AG 24, 25, 26


315 g

11.11 oz

Control surfaces:



Element 2 weight of parts:



 2.01 oz



 0.81 oz

Rudder / vert stab


 0.41 oz

Elevator / hor stab


 0.46 oz

V- Mount


 0.21 oz

Center panel


 3.20 oz

Tip panel


 1.9 oz

Carbon joiner


 0.2 oz

Servo cover


 0.12 oz



 0.16 oz



 0.35 oz

Rudder horn


 0.03 oz



It's "landed" in the country.

Great news! Our first Element 2m Windy version has come into the country and is at customs! I wonder how long it will before it gets to us? We are super excited about this new model.

A third party will do an unbiased, full unboxing review for us. And we will do a flight review once built. Stand by for lots of info.

Remember you can buy Replacement Wing Sets for your home built booms!

Write your review!

Write a review

Element 2m Pure Glider Windy Version - REF

Element 2m Pure Glider Windy Version - REF

Reinforced pure glider version of Element 2 RC model with 2000 mm / 78.74" wingspan. REF version.